Seek and measure lens cener thickness only an exact point you
Lens Center Thickness Gauge
CTgauge S / CTgauge R
Now fast and non-contact lens center thickness measurement is available along with ⊿Ｈ（Sag）measurement. Also go no-go decision function and measurement certificate output are included.
Two types are available depending on your application
Standard Model for measurement of an individual lens CTgauge S
Standard Model for measurement of an individual lens
Lens Center Thickness Gauge CTgauge S
When various lens types need to be measured
Every lens has a different geometry, diameter, and edge thickness. To make a special lens holder for different types of lenses is not practical. That problem is resolved by the lens holder mechanism that can center each specimen lens. It allows measurement any time you want.
Centering is autonomously established for specimen lens with diameters of 20 to 80 mm. The soft resin is used for the holder section to prevent chipping of the lens edge.
Model for consecutive measurement with rotating lens holders CTgauge R
Model for consecutive measurement with rotating lens holders
Lens Center Thickness Gauge CTgauge R
Numbers of the same specimen lenses need to be measured quickly
n the lens manufacturing process, many specimen lenses need to be measured within a short period of time. This machine can be equipped with the special feature of a rotating stage lens holder with multiple holes for specific diameters of the lenses to allow automatic center thickness measurements.
【 Rotating Stage 】
The lens holder with numbers of holes suitable for the specimen lens diameter is provided.
【 Tilt Function is provided 】
To set up the specimen lenses in the specified positions, the machine should be tilted at the appropriate angle.